Dixon ZTR 5023 ride on lawn mower, only 855 hours of use in full working order. Videos can be sent via whatsapp to show it runs and the blades engage 122cm with cut. 11 GA – rectangular tube. Two piece-made of rotational molded polyethylene. Body contains access panels for battery service & engine. To mower deck belt removal. Rear body tilts up to allow. Service on the entire drive system. Designed for operator comfort by use of high-density. Closed cell foam padded back rest and arm rests. Is adjustable fore and aft. Two decks are available. The 42 is made of stamped. The 50 is made of 11 GA fabricated welded. Construction with external reinforcement ribs. Blades combine for either a 42 or 50 cut width. Height approximately 1.5 to 4.5 via 7 position lift handle. Each rear wheel is independently driven by a HydroGear. BDU-10L Series 70 hydrostatic transmission. Transmissions power a fully enclosed HydroGear gearbox. 19HP Kawasaki overhead valves, replaceable oil filter, full. Pressure lube system, dual element air cleaner, integral fuel. STARTING SYSTEM: Electric by key switch operation with safety interlocks on. Parking brake and blade drive clutch. 11 X 4 X 5 ribbed tread. 20 X 10 X 8 Multi-Trac. 16 – 21 lbs. 8 – 14 lbs. Fuel – 4.8 gallons total (dual tanks). Oil tank – 3 quart with in-line 40 micron filter. Engine – 2 qts. SAE 30 (with filter). 55 (42 Deck), 60 (50 Deck). 594 lbs, 42 Deck, 650 lbs (50 Deck). Additional information provided in service instructions under the individual component. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.